Description
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
This set includes both unsupported and presupported miniatures using the Lychee Slicer. It also includes a Lychee save so you can modify the supported sections further.