Aach’yn Adventures: The Rub’aii Battlements

By: Aether Studios


Check out our latest Kickstarter, Eggnog & Brains right here.

Included in this set of 3D-printable STL models from Jeromy K. Smith you will find the awesome battlements of Rub’aii. The Demonprince of Fear has many cultists that defend his twisted temple of nightmares. Inside you will find 16 models 7 Scatter terrain models and 9 Tiles for the Dragonlock terrain system.

Spiked Firepit (with Tealight slot underneath) and Pillar of Rub’aii Scatter models
Barricade and Spiked Ark scatter models
3 scatter arks (Normal, Damaged, and Broken)
Tile models (not shown, but also included are plain 2×2 and 4×4 versions of the Old Floe terrain for our upcoming unground village set)

Report Abuse



Layer Size​: 0.15mm minimum. 0.1mm recommended.

Infill​: 10% for all models recommended

Top/Bottom Layers​: 9 (or 0.9mm if using a different layer size than 0.1mm)

Side Shell Count​: 2 (or 0.8mm if using a different nozzle size than 0.4mm)

Raft/Brim/Supports​: Brim helpful on small items


Model Scale

28 mm

Support Details

Supportless (Doesn't require supports to print)

Print Dimensions

Not Listed

Included Files

Not Listed


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Vendor Information

Product Enquiry

You may also like…