Seraphim: Statues

By: Aether Studios


Check out our latest Kickstarter, Eggnog & Brains right here.

The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.

This expansion set includes numerous statues that might be found in a classic marble block temple.

Report Abuse


Recommended Print Settings:

Layer Size: 0.1mm recommended
Infill: 10% recommended
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: none

Model Scale

28 mm

Support Details

Supportless (Doesn't require supports to print)

Print Dimensions

Not Listed

Included Files

File NameFile Size
2x6 Seraphim Stairs (LED Slot).stl28MB
4x4 Seraphim Brazier Stairs (LED Slot) v2.stl118MB
4x4 Seraphim Stairs.stl67MB
2x2 Seraphim Statue Alter 1 (LED Slot).stl17MB
2x2 Seraphim Statue Alter 2 (LED Slot).stl34MB
2x2 Seraphim Statue Alter 3 (LED Slot).stl34MB
2x2 Seraphim Statue Alter 4 (LED Slot).stl40MB
2x2 Seraphim The Angel Wade Basin (LED Slot) v2.stl27MB
2x2 Seraphim The Apostle Lisa Statue v2.stl12MB
2x2 Seraphim The Archangel Richard Statue v2.stl9MB
2x2 Seraphim Weeping Angel Altar (LED Slot).stl5MB
4x4 Seraphim The Benediction of Valerie Fountain v3.7.stl36MB
LED Floor Slot (fits under tile).stl1MB


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Vendor Information

Product Enquiry

You may also like…