Description

Simple to use replacement treads for your tank conversion project. It can be made to fit the Reman Luss or Khimera chassis. Parts are a one-for-one replacement for plastic treads. Treads are 50% wider than included with the basic kit (10mm to 15mm). There are also spacers used to widen the section of the hull where the tracks attach. Some other accessories or parts may not be compatible (like track guards)

This increases the width of the tank by 10mm (less than 1/2 inch).

Kit includes Spacers for the Reman Luss and Khimera chassis along with various lengths of track for each kit. Other parts and accessories show in the images are NOT included.

You will need the following for a Reman Luss
8x spacers to extend the width of tracks by 50%
10x single tracks (replaces parts 'L6' and 'R6' from the plastic kit)
2x four-track sections (replaces parts 'L5' and 'R5' from the plastic kit)
2x six-track sections (replaces parts 'L4' and 'R4' from the plastic kit)
2x twelve-track sections (replaces parts 'L3' and 'R3' from the plastic kit)
2x compressed eight-track sections (replaces parts 'L1' and 'R1' from the plastic kit)
2x stretched eight-track sections (replaces parts 'L2' and 'R2' from the plastic kit)

You will need the following for a Khimera
4x spacer A and 4x space B to extend the width of tracks by 50%
12x single tracks
4x two-track sections
4x four-track sections
4x twelve-track sections

Notes on assembly
Reman Luss: Each Spacer has a small cut-out to fit the text molded onto the part from the plastic kit. See images folder for placement.

Khimera: There are two types of spacer. See images folder for placement.

Copyright TinyPanzerStudio