Description
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm recommended, 0.1mm for smoother features.
Infill: 10% for all models recommended. Less infill is possible, but models will be less sturdy.
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: The center of the bridge prints in two parts, and you should glue the two parts together.
Reviews
There are no reviews yet.