Description
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
shdwfriend (verified owner) –
This was a fun commission piece to paint. Lots of “Alice In Wonderland” vibes, but not too over the top. I plan on using the Broodmother in a future session of DnD.