Description
This set, Passageways, features all the pieces you need to fill out the interior corridors of a ship or station, gridded for 1 inch combat. Hallways, intersections, corner doors, everything you could need to diversify your ship layout is included.
RECOMMENDED PRINT SETTINGS
● Layer Size: 0.15mm minimum. 0.1mm recommended.
● Infill: 10% for all models recommended
● Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
● Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
● Raft/Brim/Supports: Brim may be helpful when printing small items like the Lever or Doors.
Reviews
There are no reviews yet.