Seraphim -X-

By: Aether Studios


Check out our latest Kickstarter, Sky Islands 2 – Drumbeat of War right here.

This set of 3D-printable Angelic terrain is featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.

This set was the 10th expansion in the series, filled with models requested by fans and patrons. Giant archways and doors, more flora options, and new walls for temple settings fill this set.

Report Abuse


Recommended Print Settings:

● Layer Size: 0.15mm recommended, 0.1mm for smoother features

● Infill: 10% for all models recommended

● Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)

● Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)


● Raft/Brim/Supports: Brim is required when printing the doors and portcullis files

Model Scale

28 mm

Support Details

Supportless (Doesn't require supports to print)

Print Dimensions

Not Listed

Included Files

File NameFile Size
2x4 Seraphim Large Portcullis.stl124MB
2x6 Seraphim Grand Door Frame.stl24MB
2x6 Seraphim Grand Portcullis Frame.stl127MB
Seraphim Grand Arch Door.stl33MB
Seraphim Grand Arch Top.stl29MB
Seraphim Grand Portcullis.stl29MB
Seraphim Large Portcullis.stl15MB
2x2 Seraphim Square Cistern (LED Slot).stl17MB
2x2 Seraphim Twisted Boxwood.stl17MB
Seraphim Clip-On Edge.stl5MB
Seraphim Clip-On Normal Block.stl2MB
Seraphim Clip-On Short Block.stl2MB
2x2 Seraphim Corner 3a (Plain Column).stl10MB
2x2 Seraphim Corner 3b (Richard Wings).stl17MB
2x2 Seraphim Richard's Sacred Altar Wall.stl26MB
2x2 Seraphim Wall 1e - Wings of the Apostle Richard .stl18MB
2x2 Seraphim Wall 1f - Grande Richard Wing.stl10MB


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Vendor Information

Product Enquiry