Seraphim: Short Wall

By: Aether Studios

$11.00

Check out our latest Kickstarter, Sky Islands 2 – Drumbeat of War right here.

Shortwall Seraphim is a 3d printable set of dungeon terrain featuring lower than normal walls. Shorter height walls are always a popular and economically friendly option for getting more terrain for your gaming funds, and these walls continue that tradition.

The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.

This expansion set includes walls, corners, and corridors that are only half the usual height. They can be used for better visibility and easier reach when you have a large map on the tabletop.

Report Abuse

Description

Recommended Print Settings:

Layer Size: 0.1mm recommended
Infill: 10% recommended
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: none

Model Scale

28 mm

Support Details

Supportless (Doesn't require supports to print)

Print Dimensions

Not Listed

Included Files

File NameFile Size
2X2 Seraphim 1 Post.stl5MB
2X2 Seraphim 2 Post.stl5MB
2X2 Seraphim 3 Post.stl6MB
2X2 Seraphim 4 Post.stl7MB
2X2 Seraphim Corner Gargoyle.stl12MB
2X2 Seraphim Corner With Post.stl9MB
2X2 Seraphim Corner.stl8MB
2X2 Seraphim Corridor.stl8MB
2X2 Seraphim Curved Wall Gargoyle.stl13MB
2X2 Seraphim Curved Wall.stl6MB
2X2 Seraphim Dead End.stl9MB
2X2 Seraphim Opposing Post.stl5MB
2X2 Seraphim Wall Transition 2.stl7MB
2X2 Seraphim Wall Transition.stl7MB
2X2 Seraphim Wall.stl6MB
LED Floor Slot (fits under tile).stl1MB

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Vendor Information

Product Enquiry

You may also like…