Seraphim: Bathhouse

By: Aether Studios


Check out our latest Kickstarter, Eggnog & Brains right here.

The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.

This expansion set includes water tiles with decorative steps and walls to create the ultimate angelic bathhouse.

Report Abuse


Recommended Print Settings:

Layer Size: 0.1mm recommended
Infill: 10% recommended
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: none

Model Scale

28 mm

Support Details

Supportless (Doesn't require supports to print)

Print Dimensions

Not Listed

Included Files

File NameFile Size
2x2 Seraphim Bathhouse Corner.stl19MB
2x2 Seraphim Bathhouse Curved Corner.stl15MB
2x2 Seraphim Bathhouse Interior Corner.stl24MB
2x2 Seraphim Bathhouse Interior Curve Brazier.stl35MB
2x2 Seraphim Bathhouse Interior Curve.stl19MB
2x2 Seraphim Bathhouse Steps Corner.stl15MB
2x2 Seraphim Bathhouse Steps Curved Corner.stl16MB
2x2 Seraphim Bathhouse Steps End.stl17MB
2x2 Seraphim Bathhouse Steps.stl15MB
2x2 Seraphim Bathhouse Straight Ledge.stl17MB
2X2 Water (LED).stl9MB
4x4 Seraphim Bathhouse Corner.stl26MB
4x4 Seraphim Bathhouse Curved Corner.stl22MB
4x4 Seraphim Bathhouse Inner Corner Steps.stl24MB
4x4 Seraphim Bathhouse Steps Corner.stl22MB
4x4 Seraphim Bathhouse Steps Curved Corner.stl25MB
4x4 Seraphim Bathhouse Steps Dais.stl23MB
4x4 Seraphim Bathhouse Steps Valerie Statue.stl30MB
4x4 Seraphim Bathhouse Steps.stl24MB
4X4 Water (LED).stl29MB
LED Floor Slot (fits under tile).stl1MB


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Vendor Information

Product Enquiry

You may also like…