KS7ROQ01 – Roqom Dungeon Terrain

By: Aether Studios

$17.00

Included in this set of dragonbite compatible terrain from Károly “Carl” Csúrgó and Will Walker you will find over 100 models of 2×2 tiles. Roqom is a tripled mirrored dungeon set. We call it tripled mirrored because every effort has been taken to make sure each wall, corner, and everything else comes in each of three unique styles. These unique styles feature motifs built into the corner pillars, diagonal walls, and more. This set is designed with maximum utility to have the full 2×2 experience of multi-level dungeon building. Thank you for your support of Aether Studios, this Kickstarter provided funds for a brand new computer for Carl and a great deal of additional support for the families of our artists. It is an honor to have a place on your gaming table.

Absolutely no supports are needed when printing the models in this set.

Report Abuse

Description


TERRAIN RECOMMENDED PRINT SETTINGS 

Layer Size​: 0.15mm minimum. 0.1mm recommended.
Infill​: 10% for all models recommended
Top/Bottom Layers​: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count​: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports​: None

 

 


MINIATURE RECOMMENDED PRINT SETTINGS 

Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None

Model Scale

28 mm

Support Details

Supportless (Doesn't require supports to print)

Print Dimensions

Not Listed

Included Files

Not Listed

Vendor Information

Product Enquiry

You may also like…