This model came about as a request from the patrons of Aether Studios. They asked for a Dwarven Pipe Organ and our master sculptor, Nasos Maloudis, delivered. This model prints without supports on FDM and Resin printers and looks fantastic as scatter terrain.
MINIATURE Recommended Print Settings:
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)