From FatesEnd2 Kickstarter: wwww.FatesEndTowers.com
The Cthulhu Dice Tower is a file from this campaign.
EASY TO PRINT! The towers will be designed to be 3D Printed easily without supports! (Supports are the WORST!)
All files will be designed to print on smaller FDM Printers like the Prusa Mini. Towers taller than 7″ (about 177mm) tall will be split into two models so they’re printable on smaller printers.
These objects can be any size that your printer can support, so you can print them smaller (if you have a small printer) or larger (for large dice) if desired. All Dice towers are designed to work with standard 20mm dice at 100% scale. (*Dice set/tower scales are determined by the size of the D20 in the set.) If you can’t print the towers at 100%, then print them at 60% to work with tiny 12mm dice sets (can be found in local game stores or on Amazon.) Teeeny tiny printers such as the Photon and Mars are unlikely to print the majority of dice towers AND work with existing dice. However, Dice Jails and Vaults may work, depending on size and scale.
*Only Merchants are permitted to sell prints of these files. If interested, please check the MERCHANT LISENCE section on www.fatesendtowers.com.