Commercial – Initiative Tower – The Wizard’s Tower – Mechanical Variant

By: Degenerate Polygons

$39.99

This tower is used to track the characters’ initiative in role playing games (it could also have some other creative tracking uses…). The tower’s labels can be moved around and re-ordered.
2 versions of this Wizard’s Tower exist, a mechanical and a magnetic one, depending on the type of label connection/support type. This is the mechanical one.

Here you can find the magnetic variant.

Check the description for more details!

Our website (more info and videos about the towers): https://degeneratepolygons.com/

 

PRINTING INFO

  • Easy to print with small/medium printers too, the bigger parts aren’t larger than 14x14x14cm, 5.5″x5.5″x5.5″.
  • Prints easily in PETG from 0.1 to 0.6mm layers (up to 1mm should be ok)
  • 1.2 or 1.6mm skin, 1.6 it’s usually pretty sturdy with 10-15% infill
  • Minimal supports needed (bottom of modules for female connectors)
  • Typical printing time at 0.2mm: 35h
  • Time to print: 18-70h+
  • 750g PETG w/ 9 labels

Report Abuse

Description

As the name suggests, this tower is used to track the characters’ initiative in role playing games (they could also have some other creative uses…).

The tower support some labels that can be moved around and ordered, depending on a character’s initiative order.

Check our color sets animated gallery: Initiative Towers – paintjob details and variants

The Wizard’s Tower has a Fantasy/Medieval flavor, for immersive gaming, it’s appropriate for fantasy and horror settings, some characteristics:

It’s modular, each section van be printed with small printers too [14x14x14cm, 5.5″x5.5″x5.5″]. Its modularity permits to make it taller by adding sections, if you need to track more than 9 initiatives (unlikely)
Can hold a lot of standard rpg DICE on its top (or a few large ones)
Can also be used as a prop for standard 28/32mm wargaming, TTRPGs and dioramas
Final height is 34cm, 13.5″!

The standard labels cover a wide angle, in this way the tower can be placed on a corner or on one short side of the table and the players will be able to read the initiative from both long sides.

Our “Proton Connectors – Mechanical” are simple dovetail connectors that doesn’t require supports when printed vertically.

We also have a Wizard’s Tower Magnetic, with magnetic connectors for easier label management.

Various types of labels paints and treatments can be used, check this other video: Degenerate Polygons – Inititative Towers’ label options

We tested various ways for writing the characters names on the labels and they all work well:

standard acrylic colors or permanent markers
blackboard paint + standard chalk (easily erasable, retro/lo-tech look)
blackboard paint + liquid chalk pens (water erasable)
whiteboard paint/film + erasable markers (as the whiteboard!)

We create Initiative Towers of various size, dice tower+initiative tower combos and RPGs stuff: Degenerate Polygons You can subscribe to our newsletter to be notified of promotions and upcoming crowdfunding campaigns!

Scale is good with minis from 25 to 37mm.

 

PRINTING INFO

Easy to print with small/medium printers too, the bigger parts aren’t larger than 14x14x14cm, 5.5″x5.5″x5.5″Prints easily in PETG from 0.1 to 0.6mm layers (up to 1mm should be ok)
1.2 or 1.6mm skin are ok, 1.6 it’s usually pretty sturdy with 10-15% infill
Minimal supports needed (bottom of modules for female connectors)
Typical printing time at 0.2mm: 35h
Time to print: 18-70h+
750g PETG w/ 9 labels

Model Scale

32 mm

Support Details

Print Dimensions

135mm x 135mm x 340mm

Included Files

File NameFile Size
DP_IT_Wizards_Mechanical_Base4L.stl48MB
DP_IT_Wizards_Mechanical_Base1L.stl55MB
DP_IT_Wizards_Mechanical_Base2L.stl36MB
DP_IT_Wizards_Mechanical_Base3L.stl32MB
DP_IT_Wizards_Mechanical_LabelL.stl7MB
DP_Personal_License_1_0.txt0MB

Product Enquiry

You may also like…