Commercial – Initiative Tower – The Cyberpunk Tower

By: Degenerate Polygons

$39.99

This tower is used to track the characters’ initiative in role playing games (it could also have some other creative tracking uses…). The tower’s labels accomodates magnets and can be moved around and re-ordered. 
The Tower it’s also a modular Dice Tower!

Check the description for more details!

Our website (more info and videos about the towers): https://degeneratepolygons.com/

Report Abuse

Description

As the name suggests, this tower is used to track the characters’ initiative in role playing games (they could also have some other creative uses…).

The tower support some labels that can be moved around and ordered, depending on a character’s initiative order.

The Cyberpunk Tower has a sci-fi/modern look, for immersive gaming, it’s appropriate for contemporary, cyberpunk and sci-fi settings, some characteristics:

Its modularity permits to disassemble it for easier transportation.

The base holds 8 magnetic labels.

Can also be used as a prop for wargaming, TTRPGs and dioramas
Final height is around 35cm (14″)!

The standard arc labels cover a wide angle, in this way the tower can be placed on a corner or on one short side of the table and the players will be able to read the initiative from both long sides.

Our “Proton Connectors – Magnetic” are simple connectors that doesn’t require supports when printed vertically. They accommodate common 8x2mm disk magnets …not included 😉

16 magnets are needed (twice the number of labels used) those are 8x2mm neodimium disk magnets.

 

NOTE ON MAGNET’S STRENGTH: N45 upwards are ok, N52 are great, N35 work. Reducing the space between a tower’s magnet and its corresponding label’s magnet (for example, by filing) will increase the attraction strength.

NOTE ON MAGNETS POLARITY: magnets must be magnetized axially (each flat face is a different pole). That’s also the most common type of magnetisation found in this type of magnets. Double check the polarity before inserting the magnets, it will make the process quicker (they could be removed and reversed afterwards, thanks to slots in the Proton Connectors, however it’s quicker to insert them correctly the first time).

You can watch a video about the magnets connectors here: Degenerate Polygons Initiative Tower – Wizard’s Tower – Magnetic variant

Various types of labels paints and treatments can be used, check this other video: Degenerate Polygons – Inititative Towers’ label options

We tested various ways for writing the characters names on the labels and they all work well:

standard acrylic colors or permanent markers
blackboard paint + standard chalk (easily erasable, retro/lo-tech look)
blackboard paint + liquid chalk pens (water erasable)
whiteboard paint/film + erasable markers (as the whiteboard!)

Check our color sets animated gallery: Initiative Towers – paintjob details and variants

We create Initiative Towers of various size, dice tower+initiative tower combos and RPGs stuff: Degenerate Polygons You can subscribe to our newsletter to be notified of promotions and upcoming crowdfunding campaigns!

 

PRINTING INFO

Easy to print with small/medium printers too, the bigger parts aren’t larger than 15x15x15cm, 6″x6″x6″Prints easily in PETG from 0.05 to 0.6mm layers (up to 1mm should be ok)
1.2 or 1.6mm skin are ok, 1.6 it’s usually pretty sturdy with 10-15% infill
Minimal supports needed (bottom of modules for female connectors). For some PETG brands some support under the male connectors “hooks” and for the base door’s (dice exit) lintel could be useful.
Typical printing time at 0.2mm: 5-10h for each section
Time to print: 20h+

Model Scale

Not defined

Support Details

Print Dimensions

125mm x 110mm x 350mm

Included Files

File NameFile Size
DPITCT_label.stl12MB
DPITCT_base1.stl15MB
DPITCT_base2.stl14MB
DPITCT_base3.stl18MB
DPITCT_base4.stl19MB

Product Enquiry

You may also like…