Aztlan Sewers I: Starter Set

By: Aether Studios


Check out our latest Kickstarter, Space Bug Prairie right here.

Aztlan Sewers is a set we have wanted to do for a long time, but we had to do it right. We didn’t want a sewer system that was less epic than the previous one we did for the community creator program, so we spared no expense of time to make sure of it.

This starter set is a full and complete series of walls, water, channels, and everything else you need to make a vast sewer dungeon. Aztlan is Will’s personal favorite set and the idea of trying to do a set of sewers built by a race of snakefolk was a big goal for 2021. After his hard work on Pharaoh Fantasy Villages, Will asked Carl to take the helm for this next massive expansion. In one month together they produced over 200 models, including the 50+ included in this free set.

All of us at Aether thank Carl for breathing life into this project and helping us start the most dynamic set of sewer terrain ever.

This product is part of the following bundles:

Report Abuse



Layer Size​: 0.15mm minimum. 0.1mm recommended.

Infill​: 10% for all models recommended

Top/Bottom Layers​: 9 (or 0.9mm if using a different layer size than 0.1mm)

Side Shell Count​: 2 (or 0.8mm if using a different nozzle size than 0.4mm)

Raft/Brim/Supports​: None



Layer Size: 0.1mm recommended, 0.05mm for resin.

Infill: 25-35%% recommended.

Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)

Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)

Raft/Brim/Supports: None


Model Scale

28 mm

Support Details

Supportless (Doesn't require supports to print)

Print Dimensions

Not Listed

Included Files

Not Listed


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Vendor Information

Product Enquiry

You may also like…