AEPCEF10 – Peaceful Smithy

By: Aether Studios

$9.00

Included in this set is a Blacksmith House on a 6×6 Dirt/Thicket tile, and also available as Scatter terrain. Many other scatter models exist including a roof, weapons, and smithing tools.

This product is part of the following bundles:

Report Abuse

Description


TERRAIN RECOMMENDED PRINT SETTINGS 

Layer Size​: 0.15mm minimum. 0.1mm recommended.
Infill​: 10% for all models recommended
Top/Bottom Layers​: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count​: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports​: None

 

 


MINIATURE RECOMMENDED PRINT SETTINGS 

Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None

Model Scale

28 mm

Support Details

Supportless (Doesn't require supports to print)

Print Dimensions

Not Listed

Included Files

Not Listed

Product Enquiry

You may also like…